graduate student
employee
GRNTI 55.03 Машиноведение и детали машин
BBK 345 Общая технология машиностроения. Обработка металлов
The vibrating cutting is one of the effective methods of processing workpieces of hard materials for the manufacture of parts of mining and metallurgical equipment. With proper selection of the vibration modes of cutting improves durability of the cutting tool and to ensure reliable chip control. When machining materials using a cutting tool vibration in the cutting area there are processes other than the processes occurring in the normal turning. A brief literature review of studies describing the processes occurring in the cutting zone. Particular attention is paid to the process and built-up edge is a schematic diagram of its occurrence and the removal from the surface of the cutting tool. The mechanism of the cutting edge wear, impact durability during the built-up edge on the tool and the machined surface roughness. A hypothesis to explain the physical processes of cutting vibration during turning. A scheme of the process of cutting vibration and formulated conditions for the formation of build-up and its subsequent removal from the tool tip.
vibration cutting, built-up edge, during the tool life, surface roughness, contact interaction.
1. Granovskiy G.I., Grudov P.P., Krivo-ukhov V.A., Larin M.N., Malkin A.Ya. Rezanie metallov. M.: Izd. Mashgiz, 1954. 472 s., il.
2. Dreval´ A.E., Luzhanskiy M.S. Narostoobrazovanie i rabotosposobnost´ rezhushchego instrumenta. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie. 2012. №12. S. 3-7.
3. Granovskiy G.I., Granovskiy V.G. Rezanie metallov: Uchebnik dlya mashinostr. i priborostr. spets. Vuzov. M.: Izd. Vyssh. Shk., 1985. 304 s., il.
4. Bobrov V. F. Osnovy teorii rezaniya metallov. M.: Izd. Mashinostroenie, 1975. 344 s.
5. Starkov V.K. Obrabotka rezaniem. Upravlenie stabil´nost´yu i kachestvom v avtomatizirovannom proizvodstve. M.: Izd. Mashinostroenie, 1989. 296 s.
6. Starkov V.K. Fizika i optimizatsiya rezaniya materialov. M.: Izd. Mashinostroenie, 2009. 640 s.
7. Talantov N.V., Kozlov A.A. Mekhanizm vzaimodeystviya struzhki s peredney gran´yu instrumenta. Izvestiya vuzov. Mashinostroenie. 1976. № 3. S.147-150.
8. Talantov N.V. Fizicheskie osnovy pro-tsessa rezaniya, iznashivaniya i razrusheniya in-strumenta. M.: Izd. Mashinostroenie, 1992. 240 s.
9. Polyanchikov Yu.N., Pakhtusov S.M., So-lodkov V.A., Cheremushnikov N.P., Kumakov A.V., Kraynev D.V. Vliyanie mekhanizma kontaktnogo vzaimodeystviya na iznos peredney poverkhnosti instrumenta. Izvestiya VolgGTU. 2004. №9. S. 42-44.
10. Astakhov V.P., Shvets S.V., Osman M.O. M. Ship structure classification based on mechanies its formation. Materials processing Technology. 1997. Vol. 71/2. P. 247-257.
11. Astakhov V.P., Shvets S.V., Osman M.O. M. The Bending Moment as the Cause of Chip Formation. Manufacturing Science and Engineering. Proceedings of the ASME international mechanical engineering congress & exposition. 1997. Vol. 12. P. 53-60.
12. Emel´yanov S.G., Yatsun E.I., Shvets S.V., Remnev A. I., Pavlov E. V. Vliyanie obrazovaniya narostov pri tochenii na stoykost´ i kachestvo obrabotannoy poverkhnosti. Tekhnologiya mashinostroeniya. 2011. №9. S. 30-34.
13. Yatsun E.I., Shvets S.V., Remnev A.I. Issledovaniya obrazovaniya narostov pri rezanii metallov / Sovremennye instrumental´nye sistemy, informatsionnye tekhnologii i innovatsii: materialy VIII Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii: v 2 chastyakh. Yugo-Zap. gos. un-t. (Kursk, 28 dekabrya 2010 g.), Kursk: Izd-vo YuZGU, 2011. Ch.2. S. 125-132.
14. Lipatov A.A. Rabotosposobnost´ titanotantalovykh tverdykh splavov pri rezanii trudnoobrabatyvaemykh materialov. Izvestiya VolgGTU. 2006 №2. S. 33-35.
15. Lipatov A.A. Osobennosti perekhoda ot narostoobrazovaniya k vzaimodeystviyu s plasticheskim kontaktom pri obrabotke austenitnoy stali. Izvestiya VolgGTU. 2013. T. 9. №7 (110). S. 31-34.
16. Pankin A.V. Obrabotka metallov rezaniem. M.: Izd. Mashgiz, 1961. 520 s.
17. Rubinshteyn S.A., Levant G.V., Ornis N.M., Tarasevich Yu.S. Osnovy ucheniya o rezanii metallov i rezhushchiy instrument. M.: Izd. Mashinostroenie, 1968. 392 s.
18. Arshinov V.A., Alekseev G.A. Rezanie metallov i rezhushchiy instrument. Izd. 3-e, pererab. i dop. Uchebnik dlya mashinostroitel´nykh tekhnikumov. M.: Mashinostroenie, 1976. 440 s.
19. Yatsun E.I., Emel´yanov S.G., Remnev A.I., Shvets S.V. Mekhanizm struzhkozavivaniya pri rezanii metallov. Tekhnologiya mashinostroeniya. 2012. №5. S. 9-14.
20. Lasukov A.A., Chazov P.A., Barsuk A.V. Izuchenie protsessa elementnogo struzhkoobrazovaniya pri rezanii trudnoobrabatyvaemykh materialov / Innovatsionnye tekhnologii i ekonomika v mashinostroenii: sbornik trudov V Mezhdunarodnoy nauchno-prakticheskoy konfe-rentsii: v 2-kh t.. Yurginskiy tekhnologicheskiy institut. (Yurga 22-23 maya 2014 g.), Tomsk: Izd-vo Tomskogo politekhnicheskogo universiteta, 2014. T.1. S. 290-294.
21. Korneeva V.M., Korneev S.S. Razrabotka modeli protsessa struzhkoobrazovaniya v usloviyakh sverkhvysokikh skorostey rezaniya. Tekhnolo-giya mashinostroeniya. 2014. №11. S. 54-58.
22. Kabaldin Yu.G., Kuz´mishina A.M., Seryy S.V. Atomno-dislokatsionnyy podkhod k protsessu rezaniya metallov. Trudy NGTU im. R. E. Alekseeva. 2013. №4 (101). S. 189-198.
23. Poduraev V.N. Obrabotka rezaniem s vibratsiyami. M.: Izd. Mashinostroenie, 1970. 350 s.
24. Kumabe D. Vibratsionnoe rezanie: Per. s yap. S. L. Maslennikova / Pod red. I. I. Portnova, V. V. Belova. M.: Mashinostroenie, 1985. 424 s, il.
25. Shvachkin E.G. Povyshenie perioda stoykosti instrumenta pri vibratsionnom tochenii vysokomargantsovistykh staley: dis. … kand. tekhn. nauk: 05.03.01 / Shvachkin Evgeniy Gennadievich. - Staryy Oskol, 2003. 192 s.
26. Pat. 2212309 Rossiyskaya Federatsiya, MKI 7 B 23 B 25/00. Ustroystvo dlya vibratsionnogo rezaniya / A. P. Sergiev, E. G. Shvachkin; zayavitel´ i patentoobladatel´ A. P. Sergiev, E. G. Shvachkin. - № 2001123546/02; zayavl. 22.08.2001; opubl. 20.09.2003, Byul. № 26. - 7 s.
27. Sergiev A.P., Vladimirov A.A., Makarov A.V., Shvachkin E.G. Osobennosti struzhkoobrazovaniya pri chistovom vibratsionnom tochenii stali 12Kh18N10T. Sovremennye problemy gorno-metallurgicheskogo kompleksa. Nauka i proizvodstvo: Sb. st. po materialam XIII Vse-rossiyskoy nauchno-prakticheskoy konferentsii s mezhdunarodnym uchastiem, (Staryy Oskol, 23-25 noya. 2016 g.), Staryy Oskol: Izd-vo STI NITU MISiS, 2016. T. 1. S. 285-288.
28. Sergiev A.P., Vladimirov A.A., Shvachkin E.G. Vliyanie parametrov vibrorezaniya na period stoykosti instrumenta. Fundamental´nye i prikladnye problemy tekhniki i tekhnologii. 2016. №5 (319). S. 96-101.
29. Sheleg V.K., Danil´chik S.S., Tochenie konstruktsionnykh staley s nalozheniem na podachu instrumenta asimmetrichnykh kolebaniy. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya V: Promyshlennost´. Prikladnye nauki. 2014. № 11. S. 2-7.
