Belgorod, Belgorod, Russian Federation
Belgorod, Belgorod, Russian Federation
Belgorod, Russian Federation
GRNTI 55.01 Общие вопросы машиностроения
BBK 345 Общая технология машиностроения. Обработка металлов
Considered the contact interaction support roller and bandage technological drum. Compiled calculation models are made that allow investigating the influence of the processing process on the contact spot. Analyzed the change in contact stresses for a different path and depth of cutting. Identified conditions emergence clearances. Proposed technological ways that ensure the preservation of the contact strength of the working surfaces of the bandage and roller during the processing. The calculations are performed in the environment of NX Advanced Simulation Advanced Simulation (Siemens PLM Software Inc.)
mobile technologies, technological drums, bandages, support rollers, contact strength, contact spot
1. OOO «CemServis» [Elektronnyy resurs]. URL: http://xn--b1afanrzfe1b.xn--p1ai/uslugi.html (20.03.2017).
2. OOO «MosHimCemServis» tehnologicheskoe obsluzhivanie i vosstanovlenie promyshlennogo oborudovaniya [Elektronnyy resurs]. URL: http://moshimtsemservis.ru/index.php?option=com_content&view=article&id=1:o-kmpanii&catid=2 (20.03.2017).
3. Ozek Makina [Elektronnyy resurs]. URL: http://www.rotarykiln.net/ (20.03.2017).
4. Phillips Kiln Services [Elektronnyy resurs]. URL: http://www.pkse.co.uk/services/resurfacing.php (20.03.2017).
5. Duganov V. Ya. Opredelenie peredatochnyh otnosheniy i koefficienta ispravleniya formy deformirovannogo kol'ca cementnyh pechey pri ego bescentrovoy obrabotke//Remont, vosstanovlenie, modernizaciya. 2013. № 9. S. 47-51.
6. Bondarenko Yu.A., Fedorenko M.A., Pogonin A.A. Opredelenie vozmozhnosti obrabotki krupnogabaritnyh detaley na pristavnyh stankah//STIN. 2005. № 7. S. 37-38.
7. Duyun T.A., Grinek A.V., Saharov D.V. Modelirovanie i optimizaciya tehnologicheskih processov izgotovleniya izdeliy s ispol'zovaniem metoda dinamicheskogo programmirovaniya // Vestnik BGTU im. V.G. Shuhova. 2013. №3. S. 61-65.
8. Zaharov O.V. Modelirovanie obrazovaniya pogreshnostey formy zagotovok pri bescentrovom superfinishirovanii // Avtomatizaciya i sovremennye tehnologii. 2010. № 11. S. 11-15.
9. Kolobov A. V. Tehnologicheskoe obespechenie usloviy kontakta pri sborke i ekspluatacii opor tehnologicheskih barabanov : Avtoref. dis. kand. tehn. nauk. Belgorod, 2009. 20 s.
10. Maslova I.V., Bludov A.N. Obosnovanie ispol'zovaniya upravlyaemogo processa pri vosstanovlenii formy krupnogabaritnogo tela vrascheniya, ne imeyuschego stacionarnuyu os' vrascheniya// Vestnik Belgorodskogo gosudarstvennogo tehnologicheskogo universiteta im. V.G. Shuhova. 2012. №3. S. 76-79.
11. Pogonin A.A., Bondarenko V.N., Sanin S.N., Shirtladze A.G. Remontno-vosstanovitel'naya obrabotka poverhnostey kataniya opornyh uzlov cementnyh pechey mobil'nymi stankami // Remont, vosstanovlenie, modernizaciya. 2005. №1. S. 13-16.
12. Goncharov M.S., Hurtasenko A.V., Shrubchenko I.V. Komp'yuternoe modelirovanie kontakta bandazha i rolika / Sb. dokl. Mezhdunar. nauchno-prakticheskoy konf., posvyaschennoy 60-letiyu BGTU im. V.G. Shuhova «Naukoemkie tehnologii i innovacii» (XHI nauchnye chteniya) // Belgor. gos. Tehnol. un-t. (Belgorod, 9-10 oktyabrya 2014g.), Belgorod: Izd-vo BGTU im. V.G. Shuhova, 2014. S. 216-222.
13. Shrubchenko I.V., Hurtasenko A.V., Goncharov M.S. Kontaktnye proyavleniya pogreshnosti formy i raspolozheniya v tehnologicheskih barabanah // Vestnik Belgorodskogo gosudarstvennogo tehnologicheskogo universiteta im. V.G. Shuhova. 2016. № 2. S. 81-85.
14. Goncharov P.S., Artamonov I. A., Halitov T. F., Denisihin S. V., Sotnik D. E. NX Advanced Simulation. Inzhenernyy analiz. M.: DMK Press, 2012. 504s.
15. Loskutov Yu. A. Maksimov V.M., Veselovskiy V.V. Mehanicheskoe oborudovanie predpriyatiy po proizvodstvu vyazhuschih stroitel'nyh materialov: Uchebnik. M: Mashinostroenie, 1986. 376 s.
